metallic product catalog
 
  primary framing
  secondary framing
  accessories
  roof panels
 
  BattenLok® HS
  Double-Lok®
  Ultra-Dek®
  "PBR" Panel
  IPS "SSP" Roof Panel
  IPS "RWP" Insulated Panel
  SuperLok®
  wall panels
  ips
  trim
  color charts
ultra-dek
 
ultra-dek panel profile
  
 
ultra-dek product description
Description: A metal standing seam roofing product attached by using a variety of concealed, interlocking clips that provide for minimum panel penetrations. This panel can be used on new construction as well as retrofit on existing structures. This panel is designed to provide a high degree of weathertightness and has been tested by independent laboratories in accordance with ASTM E283 and E331 (for air infiltration and water penetration).
Gauge: 24 standard and 22 gauge available on request
Lengths: 55' maximum standard and longer lengths available by special request.
Fasteners: Concealed fastening system. The clips are available as floating or fixed. Two different clip heights are available to allow for insulation.
  ultra-dek diagram
Finish: Galvalume PlusŪ and Architectural Series
Usage: New and retrofit applications
Limitations:

Recommended for roof slopes of 1/4:12 or greater. When using the fixed clip we recommend for double slope buildings 200' wide or less and single slope buildings 100' wide or less. (May vary upon extreme weather conditions.) Oil-canning is not a reason for rejection.
   
 FEATURE    BENEFIT
1 No panel penetration is required over the building envelope other than at the end laps, and panel ends which are connected by a compression joint.   1 Specially designed to seal out the elements.
2 Panel side laps arrive at the job site containing a sealant.   2 Contributes to the system's weather tight construction and ease of installation.
3 Optional weathertightness warranty.   3 Assurance that roof system will remain weather tight for extended service life.
4 Factory notched at both ends with pre-punched holes.   4 Field installation can commence or finish from either end of building.
5 End laps have a 16 GA. backup plate with pre-punched holes.   5 Solid connection at end laps and proper fastener spacing. The pre-punched holes improve installation and ensures proper panel placement.
6 High or low clips.   6 Accommodates variety of insulation systems including 1" thermal spacers at the purlin.
7 UL 90.   7 Lower insurance costs.
8 Panels interlock by snapping together.   8 No need for seaming equipment. Ease of installation.